| |
Timber Induced Draft
Tower
|
Unique
Timber Cross flow Towers by use of Seagull Bars
either in PVC or in Steel, 'C' type Drift
Eliminators, Aerodynamic FRP Fans, Drives with or
without Gear Boxes, all to give highest thermal
efficiency. Use of Seagull Bars ensure film & splash
cooling both. This gives more capacity by 20-25%
over the conventional fill design.
STRUCTURE :
Selected quality Pine Wood as per IS 2372 treated
with Chromated Cooper Arsenate ( ASCU Chemicals ) as
per IS 401.
WATER DISTRIBUTION :
Open gravity type basin made of tongue and grooved
treated timber Plank / marine plywood fitted with
polypropylene spiral target nozzles to have uniform
hot water distribution over the entire fill area. |
FILL :
ASCU treated timber splash bars fill supported on
GRP grids.
DRIFT ELIMINATOR :
Made of treated timber planks supported on grooved
treated plywood Eliminator frame in herringbone
pattern.
CASINGS & LOUVERS :
Corrugated Asbestos Cement-Board / Corrugated FRP
sheet on special applications.
HARD WARES :
Structural connections are made with Hot Dipped
Galvanized bolts. Nails are of stainless steel (304
quality), screw shank type S.S.304 / 316 quality.
MECHANICAL EQUIPMENTS : FAN : Propeller Type
multi-bladed fan assembly. Blades are of cast
Aluminium alloy and hub of cast iron. Fan directly
coupled with motor.
FAN CYLINDER : made of HDG Steel / FRP coated
Cylinder fitted with hot dipped galvanized steel fan
guard. MOTOR : New India or equivalent makes 415V /
3PH / 50Hz TEFC Weatherproof IP-54 enclosure.
Class-B insulation Flange mounted vertical motor
with extended shaft specially made for Cooling Tower
Applications. |
»Home
» Products
▪
FRP
Induced Draft Tower ▪ Timber
Induced Draft Tower
▪ Treated Timber
Factory Assembled Cooling Towers
▪ Natural
Draft Tower
» Activities »
Enquiry
|
|
